Vgate Vlinker MC+ Pro Grade Bluetooth OBD Interface for iOS Android and Windows£56.99
FORscan Diagnostic Cable for Ford, Vgate Vlinker FS£36.99
Forscan Diagnostic Cable for Ford, Recommended by FORScan Team, Vlinker FS USB cable
Veepeak USB OBD2 Adapter for FORScan Windows with HS-CAN MS-CAN Switch Professional Diagnostic Scan Coding Reset Tool for Ford Mazda Vehicles£18.00
Top quality Diagnostic Cable for Ford Mazda Daignostics with Forscan for Ford Software. Switchable HS/MSCAN coverage
Home > FORScan Ford Compatible Diagnostic Cables
Brand: Vgate
****IN Stock****
●Recommended by Bimmercode and FORScan for iOS, Android, and Windows.
●Upgraded version of Vgate iCar Pro Bluetooth OBD2 scanner, specifically for coding APP that requires large amount of data transmission. ●Vgate vLinker MC+ Bluetooth OBD2 scanner won't drain your battery if you leave it plugged in. Operating Current is 24 mA, automatic sleep in idle state, sleep current is as low as 3mA.
The Vgate vLinker MC+ Bluetooth OBD-II adapter supports SW-CAN & MS-CAN protocols - it can access these proprietary GM & Ford networks in addition to the 5 standard OBD-II protocols.
Unlike other OBD2 adapters, Vgate vLinker MC+ Bluetooth OBD2 scanner won't drain your battery if you leave it plugged in. Operating Current is 24 mA, automatic sleep in idle state, sleep current is as low as 3mA.
This pocket-size Vgate vLinker MC+ Bluetooth OBD2 adapter won't obstruct driver legroom and features unparalleled performance, intelligent sleep mode, hacker-proof security, exceptional third party app support.
Wider Car Compatibility
The Vgate vLinker MC+ Bluetooth works with all 1996 and newer 12V petrol cars compatible with standard OBD2 protocols, and all 1996 and newer 12V light commercial diesel vehicles supporting the OBD2 protocols. Not suitable for use on a 24V vehicle
The vLinker MC+ Bluetooth proprietary connection algorithm enables the MC+ to connect to more makes and models than any other scan tool. It also supports EOBD, JOBD, and all other international variants of OBD-II.
Android & iOS Device connection setup - For detailed steps, please refer to the instruction manual carefully to avoid operating errors.
# Android System Operation Steps ** - Vgate vLinker MC+
1、Insert the product into the OBD interface of the car.
2、Turn ignition to Key On Engine Off Position
3、Turn on Bluetooth on the phone.
4、After pressing the Black Button on the product, the device name can be found on the phone. (Important Operation)
5、NOTE: Search for the device name "vLinker MC" or "vLinker MC-Android"and click Pair. (For Android system) Attention!! Do not pair "vLinker MC+" or "vLinker MC-IOS"
6、Enter the pairing code: 1234 . If the pairing is successful, you can open the APP to set up the connection.
# iOS System Operation Steps ** - Vgate vLinker MC+
1、Plug the product into the OBD2 interface of the car.
3、Turn on Bluetooth on the iOS phone.
4、No need to configure Bluetooth device name in the iOS phone. Just enable Bluetooth button on the iOS device and continue to the OBD app Setting.
BMDiag are the sole authorised UK Vgate distributor Click here to verify
BMDiag WiFi ENET High Speed BMW Coding Adapter£66.00
High speed coding and diagnostic WiFi Ethernet (ENET) adapter for BMW F, G, and I series BMW vehicles Compatible with Bimmercode, ISTA+ ESYS etc
Unicarscan UCSI-2100 Bluetooth OBD2 Adapter£56.00