Best Seller

Maxiecu 3.0 Diagnostic System for Mercedes Sprinter


Maxiecu Version 3.0 Mercedes Sprinter Diagnostic System.

  • Windows 10 and  Android compatible. 
  • Component coding and adaptions- Air Mass, DPF, Pressure sensors etc.
  • WiFi and Bluetooth connections built in to the 4th Generation Vehicle Interface.
  • Free program and firmware updates included.
  • Ships from the UK, installation support included.

Minimum Requirements: Android 8.0 or Later, Windows 11 or Windows 10 64bit System 

Maxiecu Version 3.0 Diagnostic system for Mercedes Sprinter.

Affordable Sprinter Diagnostics with your Windows laptop!

Using the processing power of your Laptop, the Maxiecu Sprinter Diagnostic system is an affordable way to read and clear fault codes, carry out adaptations, DPF service, display live data and re-initialize new sensors and components , air Flow meter etc in almost all modules in the majority of Sprinter Vans from approx 1994 - 2018 on the road today, and with regular free program updates the coverage will only get better. 

Current Model coverage: 

  • 906 Mercedes Sprinter 2006 - 2018. ( Vehicle must have 16 pin OBD2 type Diagnostic plug )
  • 903, 904, 905  Sprinter 1994 - 2005 (vehicles fitted with 14 pin round diagnostic socket) with optional Sprinter adapter cable


Sprinter 906 Supported Diesel engines:

651.940 2,2 Delphi CRD2/CRD3/CR42

651.955 2,2 Delphi CRD2/CRD3/CR42

651.956 2,2 Delphi CRD2/CRD3/CR42

642.896 3,0 CR6/CR60.30 Bosch CR6

651.957 2,2 Delphi CRD2/CRD3/CR42

642.896 3,0 CR6/CR60.30 Bosch CR60.30

Supported Controllers:

Additional/Stationary Heater

Brake System

Climate Control


Engine Diesel

Engine Petrol








Parking System


Service light reset

Signal Acquisition And Control Module


Trailer Connection

Upper Control Panel

Maxiecu V3.0 diagnostic system for Mercedes Sprinter

As Maxiecu is a PC Based tool, you can save and print diagnostic reports for vehicles to give to customers, which is good for business 

Compact advanced technology 4th Generation interface

The Maxiecu Diagnostic system is based on the 2nd Gen Interface, with its built in multiplexed capabilities and advanced features and functions this compact interface which is available in both Wifi and Bluetooth versions can communicate with all modules to a level far beyond standard ELM based interfaces. It is also firmware updateable with updates released with new versions of the Maxiecu software.

Its all about the Coverage

Having the latest technology without the coverage is not good so Maxiecu have concentrated on the features of the software as well, the coverage on all models is excellent and would be close to dealer level on most with injector coding and programming available on some modules, DPF Regeneration, Additive reset, idle adjust, Delete adaptions, Electric Parking Brake open and close, Sensor initialisation and component activations.



  • System Requirements:

  • Windows: Windows 11, Windows 10 64 bit system
  • Android :  Android 8.0 or later
  • How to tell if your Windows 10 computer is 32 or 64 bit:

  • Any questions pre purchase please do not hesitate to get in touch.