Veepeak USB OBD2 Adapter for FORScan Windows with HS-CAN MS-CAN Switch Professional Diagnostic Scan Coding Reset Tool for Ford Mazda Vehicles

Zoom

Our Price:  £18.00 –+ Add to Basket Brand:  Veepeak Delivery:  No charge Share Tweet In Stock in the UK VeePeak OBDCheck MS USB cable for Forscan. Supports HSCAN and MSCAN High speed adapter, Up to 500 Kbps Supports Windows XP through to Windows 10

VeePeak OBDCheck MS USB Cable for Ford Mazda Diagnostics.

Features:

• USB OBD2 Adapter: with labeled MS-CAN/ HS-CAN switch, compatible with Ford Mazda Lincoln vehicles by using the FORScan software, allowing access to more modules than regular OBD2 scanners.
• Dealer-level Diagnostics: read and reset Diagnostic Trouble Codes, view real-time sensor data (PIDs) from various modules on HS-CAN & MS-CAN networks, such as Engine, Transmission, ABS, Airbag, TPMS etc.
• Customize and Program: configure the as-built data of your vehicle, enable hidden features & disable existing features without having to visit a dealer. For example, program keys, disable double horn honk, turn on daytime running lights, and tyre size correction.
• Supported platforms: Windows 2000/XP/Vista/7/8/8.1/10. Baud rate up to 500 Kbps.
• Compatible with OBD-II compliant Ford, Mazda and Lincoln cars and light trucks made since year 1996. May also work with other OBD-II compliant vehicles over other software (functions depending on software).

Veepeak USB OBD2 Adapter for FORScan with MS-CAN

The OBDCheck MS is a professional diagnostics & coding tool for 1996 or newer Ford, Mazda, Mercury and Lincoln vehicles. It is designed to work with FORScan software which has support for manufacturer specific protocols, which means it can show you trouble codes from many other modules, PIDs which are not displayed by generic OBD2 scanners or applications, enable hidden features or disable existing features in your car, and run specific tests and service procedures. In other words, this cost-efficient combination of this scan tool and FORScan can do things that could cost hundreds at the dealer.

MS CAN Support

Ford and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. However, MS CAN bus is not supported by the normal ELM327 based adapters, because it is a manufacturer-specific solution and uses non-OBD2 pins. With the MS CAN switch, you can access more modules and read more information.

When using the device with Forscan you need to change the HS/MS support setting to HS/MS Switch.

This is done in Forscan settings as shown in the screenshot below, Also check the Auto increase box in COM settings and restart the forscan program.

The USB Driver is the CH340 USB Serial driver. Windows should install it automatically and Forscan should use the correct Com Port without any setting changes required. If it doesn't then check device manager to see that the correct driver is installed. See screenshot below: